Showing 295–315 of 331 results

£4.80

Theatrical Clotted Blood is a thick wound filler that adds texture to a wound and won’t run. Can also be used on its own to create scratches and grazes.

£24.95

Neill's Materials' Thixo (Thixotropic Catalyst) is a specially formulated thixotroping agent, for use with Tinsil and Supersil Silicone Mould Making Rubbers.

Additives

Tin Thix

£7.50£22.91

Tin Thix is a liquid thickener designed for mixing into condensation cure liquid rubbers to create a creamy, thixotropic consistency for turning pourable rubbers into brushable systems. Varying levels can be added to create a light gel up to a thicker silicone rubber paste.

Condensation Cure

Tinsil 7025

£19.40£280.80

TinSil 7025 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a blue, Shore A25 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

Condensation Cure

Tinsil 8015

£19.40£259.00

TinSil 8015 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a peach, Shore A15 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

Condensation Cure

Tinsil 8030

£19.40£259.00

TinSil 8030 is a 1A:10B mix ratio, tin-cured silicone with a mid-range hardness and a tough, snappy, high-tear cure. Moulds made from TinSil 8030 are often used for casting polyurethane, epoxy and polyester resin, as well as foam, wax, soap, plaster, and more.

Condensation Cure

Tinsil 8040

£19.40£280.80

TinSil 8040 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a peach, Shore A40 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

£8.00£18.00

Use TinSil Fast Cat in place of any TinSil Part A in order to accelerate cure and shorten demold time. Often used for reducing time needed between coats when TinSil rubbers are used to make brush-on blanket molds.

Condensation Cure

Tinsil Gel 10

£19.40£280.80

TinSil Gel 10 is a soft, Shore A10, 1A:10B mix, tin-cured silicone rubber. It is one of the softest options in the entire tin silicone rubber line and is best for delicate castings and applications. This translucent rubber is especially useful for animatronics and special effects.

Telephone/Email

Transparent Casting Systems

Translux D150 | SikaAxson

Translux D150 is an epoxy casting resin used for transparent casting resin for artistic / decorative applications as well as floral arrangements and inclusions. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Transparent Casting Systems

Translux D155-1 | SikaAxson

Translux D155-1 is an epoxy casting resin used for glass clear coating for art and decoration for artistic and decorative applications in thinner layers of 1 to 3mm. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Transparent Casting Systems

Translux D156 | SikaAxson

Translux D156 is an epoxy casting resin used for transparent resin for inclusions in thin layer and casting of little transparent models. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Release Agents

Ultra 4 Epoxy Parfilm

£15.00

Ultra 4 Epoxy Parfilm Mould Release Epoxy Parfilm is recommended for epoxy resins. Its highly effective, micro-thin, film-forming application offers a better release than polyvinyl alcohol or wax.

Telephone/Email

Flexible & Semi Rigid

UPX 8400 | SikaAxson

UPX 8400 is a flexible vacuum casting system used for casting under vacuum in silicone moulds to make soft prototype parts or small series of rubber like parts. Fully compatible with ESSIL 291 silicone moulds. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 3440 | SikaAxson

UR 3440 is a flexible polyurethane elastomer used for production of parts requiring high properties (selas, soft moulds, sanding masks etc.) If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 3450 | SikaAxson

UR 3450 is a flexible polyurethane elastomer used for casting resin for production of semi flexible moulds, forming tools or parts requiring good abrasion resistance and tear resistance properties. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 3490 | SikaAxson

UR 3490 is a polyurethane surface casting resin designed for foundry tools (patterns, core boxes) on aluminium pre-forms, concrete resin etc. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 5803 | SikaAxson

UR 5803 is a flexible polyurethane elastomer used for making flexible moulds for concrete industry by hand casting or with a 2K machine. The combination with UR 58630 is especially dedicated to make soft moulds to cast concrete parts in mass production. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 5805 | SikaAxson

UR 5805 is a flexible polyurethane elastomer used for production of moulds or flexible parts, by hand casting or with help of 2K machine depending on resin choice. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 7801 | SikaAxson

UR 7801 is a flexible polyurethane elastomer used for making ceramic case moulds by hand casting. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.

Telephone/Email

Flexible Polyurethane Elastomers

UR 7803 | SikaAxson

UR 7803 is a flexible polyurethane elastomer used for production of moulds by hand casting. Hardness is slightly adjustable by modification of mix ratio. If you are interested in this product, please call 01284 630028 or email info@neillsmaterials.co.uk for further information.