Prosthetic Adhesives & Removers
The high solids content of the Sil-Key Silicone Adhesive means thinners are recommended for use to maintain fluidity and extend the working life, so this same solvent is also available as Sil-Key Thinners.
Sil-Paint is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture. Thin down Sil-Paint with solvent and with addition of silicone pigments, use to paint your silicone appliances.
Our new Silicone Mask Armature is the perfect basis on which to create sculptures for full head silicone masks. Taken from a life cast it’s been reduced to give a tighter fit in certain areas. The mouth is a deep slot allowing for the lips of the mask to fit over the wearers own lips. The eye area has been flattened down to make the silicone sit tighter beneath the wearers eye and to make it easier for moulding.
Silicone oil has a variety of uses including; A softener for silicone rubbers. Oil will both the reduce the viscosity of the rubber as well as soften it. Unlike deadener, silicone oil does not cross link with the silicone.
Neill's Materials Silicone Pigments are great for adding colour to silicone products. They are highly concentrated and a drop of pigment goes a long way, making these pigments economical to use.
Neill's Materials bring you Skin Imitator, a new direct applied silicone system which is softer than alternative products on the market with the same versatility and quality. This 4-component system also comes with both a Flesh Tone and Clear Part-B, allowing for a broader range of effects to be created from one kit.
Skin Imitator 3D Bondo is an acrylic adhesive based material used with flat plate transfer moulds to create cuts and scars. Our Bondo is clear, allowing the user optimal flexibility for colouring with pigment, flocking or post application paint. Use Skin Imitator 3D Bondo Transfer Material to create high quality Prosthetic Transfers (Bondo Transfers) conveniently, without the lengthy process of self-mixing. Our fully mixed 3D Bondo contains no thickening agents, offering high flexibility with low shrinkage!
Smiths Prosthetic Deadener is the original and best for creating super soft gel appliances. By varying the ratio of deadener added to Platsil Gel 10 A&B combined you can vary the softness.
Soft Foam 4 is an easy to mix 2:1 (by weight) soft to medium, low density, self-skinning flexible polyurethane foam. The system is designed to be a medium to high rise, lightweight foam with a cream time of 60 seconds.
Soft Foam 5 is a medium to firm density flexible, self-skinning polyurethane foam. With an easy to mix 3:1 (by weight) the material has a comparatively slow pot life of 20-25 seconds, with a rise time of approximately 1.5 minutes.
The Stickfast GX-80 is the perfect introduction to professional hotmelt gluing applications. This entry-level, industrial quality glue gun operates at a pre-set temperature and is ideal for processes where glue dispensing requirements are comparatively low.
Encapsulating Plastics & Bald Caps
Super Cap Plastic encapsulate for silicone gel filled appliances. Super Cap Plastic is more stretchy and snappier allowing for better blending in to the skin and less surface crinkle. Edges can be dissolved with Isopropyl Alcohol (IPA).