PlatSil Gel 0030 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore 0030 rubber. This silicone is most often used to make hyper-realistic silicone masks, prosthetic appliances, animatronics, medical models and training aids and other special effects applications.
PlatSil Gel 0020 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore 0020 rubber. This silicone is most often used to make hyper-realistic silicone masks, prosthetic appliances, animatronics, medical models and training aids and other special effects applications.
Revolutionary when it was introduced 15 years ago. Much imitated but never equalled Platsil Gel 10 is a 1:1 mix fast curing platinum/addition cure silicone that can be used for making moulds and props, masks and, with the addition of deadener, create silicone gel prosthetics and animatronic skins.
Tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations)* for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.
Platsil Gel 00 is a variation on Platsil Gel 10. This silicone creates an already softer silicone than Platsil Gel 10, that requires less deadener to create a prosthetic gel.
From the creators of Platsil Gel 10, Platsil Gel 25 takes all the great and unique qualities of Plat Gel 10 and takes it a step further. PlatSil Gel 25 has a lower mixed viscosity than other PlatSil Gels and is very versatile when used in conjunction with PlatSil accessories.
Tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations)* for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.
PlatSil Prosthetic Adhesive, formulated for use with Platsil Gel Systems. Developed by Polytek Development Corp, this is a high strength and pressure-sensitive silicone adhesive suspended in an extremely safe cosmetic grade solvent.
Use PlatSil Deadener LV (Low-Viscosity) to soften, or “deaden”, PlatSil Gels without oil leaching. It is used to simulate the look and feel of skin or human tissue for silicone gel filled appliances and special effects.
Recommended for use with the Platsil Gel 25 System.
First there was Deadener which, when added to Platsil Gel 10, made it softer by degrees. Now Platsil Part H Hardener does exactly what it says on the tin and increases the hardness of Platsil Gel 25 as more is added.
Stoner ZIP ME-301S (Petrolease) works for rubber moulds, moulded rubber and releases almost everything from anything. It also contains FDA approved ingredients for use with food and medical applications. Stoner ZIP ME-301S (Petrolease) is fantastic for releasing Super-Cap from any kind of mould. It’s the principle release I use for getting Super-Cap encapsulated Platsil Gel appliances out of all my moulds. It’s basically vaseline / petroleum jelly in a spray can. It also pretty economical as one can gives great coverage and goes a long way. New alternative for Petrolease.
Imperiflex Squeeze Box TLP 50ml Transparent Liquid Pigments (TLP) by Imperial Surface, are manufactured clean so they can be mixed into various silicone, urethane, and coatings systems to create a dynamic finish.
You MUST mix the Pigment into a carrier like Imperial Surfaces N.I.B Clear Binder, Majestic Clear Coat, Platsil Gel 10 or a similar system to gain adhesion and UV protection. These pigments have no binder and no UV protection on their own.
