From the creators of Platsil Gel 10, Platsil Gel 25 takes all the great and unique qualities of Plat Gel 10, and takes it a step further.
From the Polytek website; PlatSil Gel 25 is a Shore A25 hardness, 1A:1B mix ratio, liquid platinum silicone rubber with a 5 minute pour time and a 1 hour demould time. Use PlatSil Gel 25 as a mould rubber, to create prosthetic appliances and for life casting. PlatSil Gels are widely used for specials effects in television, theatre and film. Gel 25 has a lower mixed viscosity than other PlatSil Gels and is very versatile when used in conjunction with PlatSil accessories. “Deaden” the rubber to soften and eliminate the snappy, synthetic look and feel of ordinary silicone rubbers. Deadened Gel 25 can be made to look, feel and move like all types of living tissue. Unlike silicone fluid, Smith’s Theatrical Prosthetic Deadener & PlatSil Deadener LV do not leach from the cured rubber/appliance so bonding and use are far easier. Use PlatSil Part H Hardener to increase the Shore hardness. Using these two accessories, Gel 25 can be made as soft as Shore OOO30 and as hard as Shore A40. Accessories are also available to increase working time; accelerate cure time; thicken the mix for brushing/layering; thin the mix for easier pouring or for softening.
Tested by an independent laboratory and were found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations)* for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.
Notice: Images are for illustration purposes only, please check product size at the time of purchase. *Compliance with this regulation does not mean that these silicone rubbers are FDA approved – the user of these materials must also comply with all applicable FDA requirements to be approved.