- Volume: 500g per bottle
- XY Planar Resolution: 0.050 mm
- Z Resolution (Layer Height): 30-100um
- Property: High hardness and toughness, and resolution. Its light color is suitable for post process, like painting.
- Way to Rinse: Clean with alcohol spray with air gun
- Compatible Printer: Phrozen 3D Printer Series
- Application: General modeling & prototyping
- Key Performance:
- Viscosity: 67 cps
- Proportion: 1.1
- Tg: 70 °C
- Elongation: 3 %
- Break value: 10 MPa
- Surface hardness: Shore 76D
- I-Zod Impact: 1.44 KJ/m2
- Suggest to use our resin and printer indoor under ventilated situation.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve our resin in closed opaque bottle in avoid of exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin away from kids.
- Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.
- Do not eat and swallow the resin. Go to hospital if necessary.
- Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
- Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature (15 – 35 °C) and dry condition.